Creating A Vt Series Emulation Session; Using The Teemtalk Session Wizard - HP T5145 - Thin Client - Tower User Manual

Creating a VT Series Emulation Session

Using the TeemTalk
Session Wizard
You can create a session either using the TeemTalk Session Wizard
or while TeemTalk is running.
This section describes how to use the TeemTalk Session Wizard to
create an VT Series emulation session.
To run the TeemTalk Session Wizard from the
1
select
All Programs
.
Session Wizard
In the
Session Name
2
this session configuration for future selection.
Select the
Transport
3
specify settings.
Select the
Connection
4
specify settings.
Select
VT Series
5
button to specify settings. (The options are described in the
ure
section "Setup Options" on page 90.)
Click to display the
Next
6
Click to display the
Next
7
If you want a shortcut icon for this session to be created on the
8
desktop, check the box labelled
.
session
Click to create the session and exit.
OK
9
To run the session, either double-click on the desktop icon if one
10
was created for the session, or run TeemTalk, display the
menu and select
.tts session file then click
Creating a VT Series Emulation Session
> >
HP HP TeemTalk Terminal Emulator
field, enter a unique name that will identify
method then click the
type then click the
in the list box then click the
Emulation
Advanced Options
Finalization
Create icon on desktop for
. Select the name of the required
Open Session
.
Open
VT Series Emulations
menu,
Start
button to
Configure
button to
Configure
Config-
dialog.
dialog.
File
>
81