Replay File To Emulation Only; Replay File To Host Only; Replay File To Both Host & Emulation; Enable Debug - HP T5145 - Thin Client - Tower User Manual

Replay File to
Emulation Only
Replay File to Host
Only
Replay File to Both
Host & Emulation

Enable Debug

reconnect, cancel or exit TeemTalk. Using this command line option
without the optional <n> value will prevent the message from being
displayed.
The <n> value is optional and can be one of the following:
1 Reconnect.
2 Cancel (default action).
3 Exit.
Command Line: -replay<n>
This specifies that a file replay is directed to the emulation only
(default), not to the host. The optional <n> parameter specifies the
speed of the replay and is a numeric value in the range 0 to 10,
where 0 (default) is fastest and 10 is slowest.
Command Line: -replayhost<n>
This specifies that a file replay is directed to the host only, not to the
emulation. The optional <n> parameter specifies the speed of the
replay and is a numeric value in the range 0 to 10, where 0 (default)
is fastest and 10 is slowest.
Command Line: -replayboth<n>
This specifies that a file replay is directed to both the host and the
emulation. The optional <n> parameter specifies the speed of the
replay and is a numeric value in the range 0 to 10, where 0 (default)
is fastest and 10 is slowest.
Command Line: -debug
This enables received host data to be logged in a file for replaying
later using the
Capture File
menu.
Command Line Options
and options on the
Replay File
Session Configuration
Tools
277