Tty Print Mode; At&T 4410 Emulation; Keyboard Mapping; Display - HP T5145 - Thin Client - Tower User Manual

VT Series Emulations

TTY Print Mode

AT&T 4410 Emulation

Keyboard Mapping

Display

88 TTY Print Mode
When the emulation is in TTY Print mode, all incoming screen data
(but not control codes except CR and LF) are sent to the printer.
TTY Print mode is toggled on and off by pressing the keys Shift +
F4 on an Enhanced AT Keyboard by default. The key function can
be mapped to a different key using the virtual key name vt_printtty.
Special key functions normally found on the AT&T 4410 keyboard
can be mapped to any key on your keyboard using the AT virtual
key names listed in the
displayed by selecting
section "Defining Key Functions" on page 38 for details.
When running the AT&T 4410 emulation, the display size is 80 (or
132) columns by 25 lines, with a scroll region of 24 lines.
A row of function buttons is displayed along the bottom of the
window. These correspond to the function keys F1 through F8 on
the keyboard.
You can action a programmed function either by pressing the
function key, or clicking the equivalent button displayed on the
screen. The middle button has no function when clicked.
Key Macro Settings
on the
Key Macros...
dialog. This dialog is
menu. Refer to the
Tools