Wyse Emulations
WPRT invisible
Factory default: Unchecked
This option applies to all emulations and enables you to specify the
appearance of write-protected characters on the display. Checking
this option will cause the characters to be invisible. Note that the
WY-50+ and WY-60 emulations also support the invisible attribute.
WPRT reverse
Factory default: Unchecked
This option applies to all emulations and enables you to specify the
appearance of write-protected characters on the display. Checking
this option will cause the characters to be displayed in reverse video.
WPRT underline
Factory default: Unchecked
This option applies to all emulations and enables you to specify the
appearance of write-protected characters on the display. Checking
this option will cause the characters to be underlined. Note that the
WY-50+ and WY-60 emulations also support the underline attribute.
WPRT blink
Factory default: Unchecked
This option applies to all emulations and enables you to specify the
appearance of write-protected characters on the display. Checking
this option will cause the characters to blink.
Display controls
Factory default: Unchecked
This option determines whether received control codes are actioned
or displayed.
Setup Options
263