Playback Keystrokes - HP T5145 - Thin Client - Tower User Manual

IBM 5250 Display Emulation
Playback
Keystrokes
206 Record & Playback Keystrokes Facility
The status line will display R**** F* where R indicates you are
in Record mode, **** is the number of keystrokes that may be
stored, and F* is the number of the Fn key pressed.
Note: If you press a pre-recorded Fn key, its contents will be
replaced with the following keystrokes. You can also remove the
contents of the Fn key before recording by pressing the Delete
key.
Enter the keystrokes to be recorded.
3
You may pause recording at any time to allow keystrokes to be
entered manually when played back by pressing Pause. Pause
mode is indicated by the following symbols on the status line.
To continue recording, press Pause again.
Note: You can cancel the newly recorded keystrokes by pressing
the Quit key. This cancellation does not affect the previously
recorded keystrokes.
To finish and save the recording, press the Record key.
4
Position the text cursor where the playback is to start.
1
Press the Play key to enter Play mode.
2
The status line will display
ing the Fn keys. A solid box indicates that the Fn key in that
position is currently storing recorded keystrokes.
Press the Fn key storing the recorded data to play back.
3
Playback will begin immediately, as indicated by a
status line. All the recorded keystrokes will be played back
automatically. When playback is completed the
and a series of boxes represent-
PLAY
on the
P
will disappear.
P