HP T5145 - Thin Client - Tower User Manual page 145

keyboard entered spaces will cause the cursor to move forward
without deleting characters that already exist. The latch can be
deactivated by a tab, line feed or home-up command. This will cause
spaces to overwrite existing characters as normal.
InhEolWrp (C)
Factory default: Unchecked
The ibit nd f ine
Inh E o l
wrap to the next line when the right margin is reached. When
checked (i.e. inhibited), on reaching the right margin, the last char-
acter position will be overwritten with every new character received
until a carriage return or other cursor movement command is issued.
Line/Page (D)
Factory default: Unchecked
The setting of this option determines whether data is sent a line or a
page at a time when in Edit mode.
When this option is checked, data will be transmitted a line at a time.
When unchecked, data will be transmitted a page at a time. Page
data will either be from the beginning of display memory or from the
current cursor position.
InhHndShk (G)
InhDC2 (H)
Factory default: Unchecked
The combined setting of these two options determine the type of
handshaking used when blocks of data are transmitted to the host.
One of three types of handshake may be used:
No handshake. Blocks of data are sent immediately when the
1
relevant transmit key is pressed.
DC1 handshake. Data is only sent to the host when the host
2
sends an ASCII DC1 control code to request it.
HP 700-92/96 Emulation
a option determines whether characters
Wr p
Setup Options 129