Error Codes - HP T5145 - Thin Client - Tower User Manual

Error Codes

If the recorded keystrokes included Pause, then playback will
halt at that point to allow you to enter keystrokes manually.
Press Play to resume playback from where you stopped typing.
If you want to cancel during the playback operation, press the
Quit key.
The following error codes may appear on the status line if an error
occurs during recording or playback.
9001 Exceeded the maximum number of allowed keystrokes.
Remedy: Press the Record key to exit Record mode. To
record a new keystroke sequence, either:
- Press the Record key and the target Fn key that has
erasable data, then enter the new data, or:
- Press the Record key and the target Fn key that has
erasable data, then press the Delete key to erase the recorded
data for that key.
9003 You pressed an invalid Fn key while performing the Record
or Play function.
Remedy: Press the Reset key.
9007 You pressed an invalid sequence key (e.g. Play) while per-
forming the Record function.
Remedy: Press the Reset key.
9010 While performing the Play function, you pressed an Fn key
that does not have a keystroke assigned to it.
Remedy: Press the Reset key.
9015 In communication mode, you pressed either the Quit or
Pause key.
Remedy: Press the Reset key.
IBM 5250 Display Emulation
Record & Playback Keystrokes Facility 207