HP T5145 - Thin Client - Tower User Manual page 275

Multiple page
Factory default: Checked
This option applies to the WY-50+, WY-60 and all the TVI
emulations. It determines whether or not more than one page of
display memory can be accessed. When checked, all pages will be
accessible. See also the
Note that the TVI emulations support two pages of 24 lines each
when this and the
Auto page
and
Screen lines Page size
Screen lines
Factory default: 24
This option applies to the WY-50+ and WY-60 emulations and
specifies the number of data lines displayed on the screen below the
status line. Note that the other emulations only support 24 lines and a
label line.
24
25
42
43
Screen columns
Factory default: 80
This option enables you to specify a display width of 80 or 132
columns.
Page size
Factory default: 1 x Lines
This option applies to the WY-50+ and WY-60 emulations and spec-
ifies the size of a page in display memory in multiples of the
setting. Note that the other emulations only support
The setting will divide the display memory into two pages,
1 + Rest
the first containing the number of lines specified by the
the second containing all the remaining lines.
option.
Auto page
options are selected, regardless of the
settings.
24 data lines and a label line at the bottom.
25 data lines but no label line.
42 data lines and a label line at the bottom.
43 data lines but no label line.
Wyse Emulations
Lines
.
1 x Lines
option,
Lines
Setup Options 259