HP T5145 - Thin Client - Tower User Manual page 177

Enter message to clear as the data will be stored until the host is
ready.
software. Press the Reset or SysReq key to remove this indicator
and unlock the keyboard.
Indicates that you must wait while the requested
function is performed.
Indicates that you tried to enter an invalid
character into a numeric field when the
numeric-lock feature was active. The keyboard
numeric-lock feature can be overridden by using a Shift key. The
keyboard can be unlocked and the indicator removed by pressing the
Reset key.
Indicates that you tried to enter data in the wrong
location. This will occur when you attempt to do
any of the following:
Enter, insert, erase, or delete a character when the cursor is in a
1
protected field or at a field attribute location.
Perform a cursor-select operation when the cursor is not in a
2
valid cursor-select field.
The keyboard can be unlocked and the indicator removed by press-
ing the Reset key.
Indicates that you attempted to insert characters into
an unprotected field when the cursor was at the end of
the field, or you attempted to word wrap to the next
line when there was not enough space to enable a word wrap.
IBM 3270 Display Emulation
Indicates that a programming error in the
data from the host has been detected,
possibly due to incompatible application
Indicates that you cannot enter any data
because the application program has disabled
the keyboard following an entry.
The Status Line 161