Compaq t1000 - Terminal Thin Client PC Manual page 67

Factory default: Selected
The setting of this option determines whether character set selection sequences for all
character sets represented in the data block are transmitted to the host, or whether spaces
are substituted for characters not contained in the current character set.
When selected, the character set selection sequences for all character sets represented in
the data block are sent. When unselected, characters that are not contained in the currently
selected National or Multinational character set are substituted with spaces.
Factory default: Selected
The setting of this option determines whether or not a record separator (RS) code is
appended to each field of data when a block is transmitted to the host. Record separator
codes are used as markers between each field when this option is selected.
Factory default: Unselected
This option determines how spaces and empty character fields within a block of data are
sent to the host.
When unselected, a space character is sent for each empty character position.
When selected, a record separator code (RS) is sent in place of empty character positions.
The last field on a line contains end of line characters as specified by the End of Line
Characters option.
Factory default: Unselected
The setting of this option determines whether a partial page or data in the scrolling region
is sent to the host when the Enter key is pressed and the Line Transmission On option is
unselected.
When selected, this option enables a partial page to be sent to the host. The format of the
partial page is determined by the setting of the Transmit Protocol option. When unse-
lected, the contents of the scrolling region are sent to the host when the Enter key is
pressed.
Setup Menus