Compaq t1000 - Terminal Thin Client PC Manual page 42

1. Click the check box, button or list box. The current setting is highlighted or sur-
rounded by a dotted rectangle, or both.
2. Press the Tab key to move forward through the options (left to right, top to bottom), or
Shift + Tab to move backwards, until the required option is highlighted or surrounded
by a dotted rectangle, or both.
3. Press the Spacebar to toggle check boxes or buttons on or off.
1. Click the Cancel button.
2. Press the Tab or Shift + Tab keys to move the cursor until it rests over the Cancel but-
ton and press Return or the Spacebar.
1. Click the OK button.
2. Press Return.
You can restore the factory default settings of all the setup options by selecting the Fac-
tory Default option in the File menu.
Some dialog boxes include a Default button to enable the default settings of options con-
tained in the dialog box to be reasserted.
The following pages describe the options available in all the menus and associated dialog
boxes. The descriptions begin by showing the menu or dialog box as it is displayed on the
screen. The factory default setting is shown below each option title where applicable.
Setup Menus
4-4