Compaq t1000 - Terminal Thin Client PC Manual page 53

Factory default: 437
This option determines which character set is used for displaying characters. The two
character set mappings (code pages) supported are 437 for normal usage (default) and 850
for multinational usage. Each set consists of two tables of characters. The first table is the
standard ASCII character set. The second table contains characters that differ between the
two sets. Refer to the Character Sets appendix for details.
Factory default: Dim
This option applies to all emulations and enables you to specify the appearance of write-
protected characters on the display. They can be displayed in reverse video, dimmed or
blinking. The WY-50+ and WY-60 emulations also support the underline and invisible
attributes.
Factory default: Unselected
This option applies to the WY-50+, WY-60 and all the TVI emulations. It determines
whether or not more than one page of display memory can be accessed. When selected, all
pages are accessible. See also the Auto Page option.
Note that the TVI emulations support two pages of 24 lines each when this and the Auto
Page options are selected, regardless of the Lines and Page Size settings.
Factory default: Unselected
This option applies to the WY-50+ and WY-60 emulations and determines whether or not
data is cleared from the display when the number of columns is changed. The screen is
always cleared if the number of columns is changed in other emulations.
Factory default: Unselected
This option applies to the WY-50+ and WY-60 emulations and enables 80 column display
with more lines of display memory.
Setup Menus