Compaq t1000 - Terminal Thin Client PC Manual page 59

This dialog box is displayed by selecting Terminal in the Settings menu.
Factory default: 24
This specifies the number of text rows that can be viewed in the workspace at any one
time out of the total number stored in memory. This can be set to a maximum of 64. Note
that the number of rows stored in memory is specified by the Memory Rows option.
Factory default: 80
This option enables you to specify a width of 80 or 132 columns for the workspace. When
set to 132, the setting of the Use 80 Column Font option determines whether all 132 col-
umns are displayed using a narrow font, or only 80 columns at a time using the normal (80
column) font, with the ability to scroll horizontally to view the remaining columns.
Factory default: Unselected
This option specifies which font to use when the Display Columns option is set to 132.
When unselected, a narrow font is used so that all 132 columns are visible in the window.
When selected, only 80 columns are visible using the normal font, with the remaining col-
umns stored off-screen. You can scroll horizontally to view the hidden columns by holding
down the Ctrl key and pressing the Left or Right Cursor keys.
Setup Menus