Compaq t1000 - Terminal Thin Client PC Manual page 23

chapter 2
This chapter describes how to configure the keyboard, define key functions, and compose
special characters.
The emulator must be configured for the nationality of the keyboard being used; other-
wise, the characters displayed may not match the key legends. The nationality is specified
using the Keyboard Language option in the Emulation Settings dialog box, which is
displayed by selecting Emulation in the Settings menu. Select the nationality required in
this list box then click the OK button to action the change and close the dialog box.
Terminal keyboards have a set of function keys labeled F1 up to F24 in some cases. The
function of these keys have been mapped to the following key combinations:
Function Key
F1 to F12
F13 to F24
The Enter key found on the numeric keypad of terminal keyboards is emulated by press-
ing Ctrl + Return.
Special key functions supported by each terminal emulation can be mapped to keys using
the predefined macros listed in the Define Key Macros dialog box as described in the next
section.
Emulator Key Combination
Ctrl + 1 to Ctrl + =
Ctrl + Shift + 1 to Ctrl + Shift + =