Compaq t1000 - Terminal Thin Client PC Manual page 65

Factory default: Unselected
The setting of this option determines the effect of an erase command on character
attributes.
When selected, both attributes and characters are cleared from display memory when an
erase command is issued.
When this option is unselected, all video attributes currently used remain in display mem-
ory when an erase command is issued. This results in new characters being displayed with
the video attributes associated with their positions on the display.
Factory default: Unselected
The setting of this option determines whether or not the host can overwrite protected char-
acters.
This dialog box is displayed by selecting Block Transmission in the Settings menu.
The options in this dialog box only apply to the block mode functionality supported by the
DEC 'VT' terminal emulations. The block mode settings that are supported by other termi-
nal emulations are specified in their respective dialog boxes.
Setup Menus
4-27