Compaq t1000 - Terminal Thin Client PC Manual page 60

Factory default: 144
This option determines the number of text rows that are stored in memory. This can be set
from 0 to 528 rows by default. The Display Rows option specifies the number of memory
rows that can be viewed in the workspace at any one time.
Factory default: 24
When the emulator is in VT420 mode, the display memory of 144 lines can be divided
into several pages, up to a maximum of six pages of 24 lines each. The setting of this
option determines the number of lines on a page and therefore how many pages are avail-
able. Note that the page size can be larger than the Display Rows setting, in which case
you can scroll the page up or down in the window by holding down the Ctrl key and
pressing the Up or Down Cursor keys. When the emulator is in any mode other than
VT420, the page size is the same as the Display Rows setting.
Factory default: 80
This option specifies the width of display memory for DEC VT modes, in the range 80 to
132 columns. When the number of Display Columns is less than the page width specified
here, you can scroll horizontally to view the hidden columns by holding down the Ctrl
key and pressing the Left or Right Cursor keys.
Factory default: Unavailable
This option determines whether or not the 25th screen line is used as a status line when the
emulator is in any DEC VT terminal emulation mode. When Unavailable or Host Writ-
able is selected, the host can write application-specific messages to the 25th line. Select-
ing None prevents this.
Setup Menus
4-22