Command Summary - US Robotics 002605-00 Installation Manual

Command Summary

Type commands in either
upper or lower case, not a
combination. Use the
Backspace key to delete
errors. (You cannot delete
the original AT command
since it is not stored in the
modem buffer.)
If a command has numeric
options and you don't
include a number, zero is
assumed. For example, if
you type ATB, the command
ATB0 is assumed.
Every command except A/ and
+++ must begin with the AT prefix
and be entered by pressing
<Return>.
108
T Q R
ECHNICAL UICK EFERENCE
based on the &F1 Hardware
Flow Control template loaded in
NVRAM when the modem is
shipped. Defaults are listed in
italics.
The maximum command length is
58 characters. The modem doesn't
count the AT prefix, carriage
returns, or spaces.
Note:
All defaults are