US Robotics 002605-00 Installation Manual page 26

Holding the modem by each corner, align
the gold edge with an empty expansion slot.
Push down gently until the modem snaps
into the slot. (Note: The drawing shows
horizontally aligned expansion slots. Some
computers have vertically aligned slots. The
instructions apply to both styles.)
22
W I
INMODEM NSTALLATION UNDER
W 3.
INDOWS X
You'll have to apply a little pressure to seat
the modem properly. Sometimes a gentle
back-and-forth motion helps get the
modem all the way into the slot. If you feel
resistance, the modem may not be properly
lined up with the slot. Do not force it. Take
the modem all the way out and try again
Once the modem is seated, secure it using
5.
the screw you removed in step 4.
Put the computer's cover back on and
6.
replace the screws
If you currently have a phone plugged into
7.
the wall jack you're going to use for the
modem, disconnect the phone's cable from
the jack
.
Plug one end of the phone cable that came
8.
with the modem into the TELCO jack at
the rear of the modem
.
.
.