Holding the modem by each corner, align
the gold edge with an empty expansion slot.
Push down gently until the modem snaps
into the slot. (Note: The drawing shows
horizontally aligned expansion slots. Some
computers have vertically aligned slots. The
instructions apply to both styles.)
8
W
H
I
INMODEM
ARDWARE
NSTALLATION
5.
6.
7.
8.
You'll have to apply a little pressure to seat
the modem properly. Sometimes a gentle
back-and-forth motion helps get the
modem all the way into the slot. If you feel
resistance, the modem may not be properly
lined up with the slot. Do not force it. Take
the modem all the way out and try again
Once the modem is seated, secure it using
the screw you removed in step 4.
Put the computer's cover back on and
replace the screws
.
If you currently have a phone plugged into
the wall jack you're going to use for the
modem, disconnect the phone's cable from
the jack
.
Plug one end of the phone cable that came
with the modem into the TELCO jack at
the rear of the modem
.
.