US Robotics 002605-00 Installation Manual page 87

NOTE:
Modem Station's
Terminal window is provided
primarily for troubleshooting
convenience. If you frequently use
BBSs, you will probably want to
use a separate, full-featured
Terminal program such as that
provided in our RapidComm
software.
On the lower part of the Terminal screen, you
will see the COM port your modem is
currently using. To select another modem,
simply click on the arrow and select that
modem's assigned port.
To the right of the port settings are the port
speed settings. Port speed is the speed at
which your computer sends data to the
U M S
SING ODEM TATION
modem. We discuss port speed settings in
detail later in this section.
Terminal includes a basic auto dialer.
To have Terminal dial a number for you, click
on Dial to bring up the Dial screen.
You need to tell the Dialer a few things about
your phone system, such as whether it uses
tone or pulse dialing, what digit, if any, you
need to dial to get an outside line, and whether
the dialer should wait between dialing that digit
and the rest of the number. Once you provide
this information, simply enter the phone number
as if you were dialing a telephone. Click on
Dial Now to dial the number.
You can end a call by clicking on Hang Up at
the bottom of the screen.
83