US Robotics 002605-00 Installation Manual page 64

When you see this screen, click OK.
You will now want to confirm that the
update is complete.
If the Modem Update Wizard does not
start automatically, start it by clicking on its
icon.
You will see a series of familiar screens.
You do not have to do anything with them.
You will see a screen telling you that the
update was successful, click Finished.
Congratulations—you've successfully
updated your Winmodem!
60
U.S. R M
OBOTICS ODEM
U W
PDATE IZARD
If you have Windows 95:
You will see a series of "New Hardware
Found" screens after Windows restarts.
You will then see a screen asking you to
select which driver to use to install your new
hardware. Select "Driver from disk
provided by manufacturer".
If you saved the files downloaded from the
server to diskette (recommended), insert that
diskette into your diskette drive.
Select the letter for your diskette drive
(usually a:\).
If you instead downloaded the files to your
hard drive, select the folder to which you
downloaded the files.
The updated files will now be installed on
your system.
You will see a window showing what
COM port your Winmodem has been