Command Summary - US Robotics 002605-00 Manual

Command Summary

Type commands in either upper or lower case, not a combination. Use the
Backspace key to delete errors. (You cannot delete the original AT command since
it is not stored in the modem buffer.)
If a command has numeric options and you don't include a number, zero is
assumed. For example, if you type ATB, the command ATB0 is assumed.
Every command except A/ and +++ must begin with the AT prefix and be entered by
pressing <Enter>.
The maximum command length is 58 characters. The modem doesn't count the AT prefix,
carriage returns, or spaces.
Note:
All defaults are based on the &F1 Hardware Flow Control template
loaded in NVRAM when the modem is shipped. Defaults are listed in italics.
P III: S D: T
ART ECTION
Q R
ECHNICAL UICK EFERENCE
141