US Robotics 002605-00 Installation Manual page 31

the one shown below.
(Note: if you do not see a new
Winmodem group, you will instead see the
Configuration screen. You will have to
choose an available I/O address and an
available IRQ. Do not select Let plug and
play configure...)
For the I/O address: Choose any on the list.
W I
INMODEM NSTALLATION UNDER
W 3.
INDOWS X
For the IRQ: The COM port/IRQ
combinations shown here work with most
computer set-ups:
COM IRQ
1....................4
2....................3
3....................5, 7, or 9
4....................5, 7, or 9
If you have a sound card, SCSI card,
or game card, it might be using IRQ 5
or 7. Do not make 5 or 7 your first
choice then, because it might not be
available.
27