US Robotics 002605-00 Installation Manual page 85

When the scan finishes, you will see the
3.
following display. Your display may differ
depending on the type and number of
modems installed.
If your modem is installed and configured
correctly, Modem Station will find the
modem and display make and model
information under the assigned port. All
currently active ports should display "Port
U M S
SING ODEM TATION
OK" under the heading. If a port displays a
"Port Error", it usually means that the port is
disabled in system setup.
NOTE:
BIOSes use different methods of
disabling COM ports. As a result,
we cannot provide support for
enabling COM ports. Please refer
to your system's documentation or
contact the manufacturer of your
system for further information.
If you look at the information for the port your
modem is using, you will see three buttons.
These allow you to access Terminal and
Modem Configurator without going back to
the main menu. Extended Information provides
detailed information about your modem,
Different systems and
81