Table of Contents
Advertisement
Register Default
S13 (cont.)
* The 1.5K-byte non-ARQ buffer allows data transfer with Xmodem- and Ymodem-type file transfer
protocols without using flow control.
The 128-byte option lets remote users with slower modems keep data you're sending from scrolling
off their screens. When remote users send your computer an XOFF (Ctrl-S) and you stop
transmitting, the data in transit from your modem's buffer doesn't exceed the size of their screen.
This is also very helpful in situations when a remote modem/printer application is losing characters.
S14
0
S15
0
126
T
ECHNICAL
Function
Bit
Value Result
3
8
On DTR signal, auto dial the number stored in
NVRAM at position 0.
4
16
At power on/reset, Auto Dial the number stored in
NVRAM at position 0.
5
32
Reserved
6
64
Reserved
7
128
Disconnect on escape code.
Reserved
Bit-mapped register setup. To set the register, see instructions for S13.
Q
R
UICK
EFERENCE
Advertisement
Table of Contents
Troubleshooting
