US Robotics 002605-00 Installation Manual page 90

Click on the Connection Control button to
bring up this screen.
In the upper left hand corner of this screen,
you will the current Connection Control
settings.
86
U M S
SING ODEM TATION
Use the Connections Control screen to
configure the following settings:
DATA TERMINAL READY (DTR)
ERROR CORRECTION
DATA COMPRESSION
CARRIER DETECT
For detailed information about these settings,
refer to the Glossary or the Technical Quick
Reference sections of this manual.
TIP:
receiving a Data Terminal Ready signal
causes the TR light to light up.
On external modems,