Table of Contents
Advertisement
The Data Control screen allows you to assign
the following basic communications settings:
PORT SPEED
PARITY
STOP BITS
WORD
FLOW CONTROL
SERIAL PORT RATE
For information on using these settings, please
refer to the Glossary at the back of this
manual.
Click on Help for quick definitions of the
terminology used in this screen.
In the upper left-hand corner of the screen,
you will see the data control commands
currently in use.
Once you have entered the Data Control
settings, click on Save to Modem. This stores
U
M
S
SING
ODEM
TATION
the settings so that you do not have to re-enter
them.
This screen also displays the default DIP
switch settings.
switches are tiny switches that
control a few basic functions on
some external modems. On
modems without DIP switches,
these functions are handled by
modem commands.
Click on Exit to return to the Modem
Configurator menu.
CONNECTION CONTROL
This is where you adjust your modem's
connection and transmission settings.
TECHNICAL STUFF:
DIP
85
Advertisement
Table of Contents
Troubleshooting
