Setting The Clock (Clock Set); System Menu Setting; Set The Select Switch To Card Or Tape. (Vp-D395I Only); Press The Mode Button To Set Camera ( ) Or Player ( ) - Samsung VP-D392 User Manual

initial setting : system menu setting

SETTING THE CLOCK (CLOCK SET)

•
Clock setup works in Camera / Player / M.Cam / M.Player modes. ➥page 18
•
Set the date and time when using this camcorder for the fi rst time.

1. Set the Select switch to CARD or TAPE. (VP-D395i only)

2. Press the MODE button to set Camera (

3. Press the MENU button.

•

The menu list will appear.

4. Move the Joystick ( /
Joystick or move the Joystick ( )to the right.
5. Move the Joystick ( /
Joystick.
•
The year will be highlighted fi rst.
6. Move the Joystick ( /
Joystick.
•
The month will be highlighted.
7. You can set the month, day, hour and minute following the same procedure after
setting the year.
8. Press the Joystick after setting the minutes.
•
A message "Complete !" is displayed.
9. To exit, press the MENU button.
•
You can set the year up to 2037.
•
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change
the date/time display mode. ➥page 32
Display illustrations in this manual
- OSD illustrations of VP-D395 i are used in this manual.
- Some of the OSD items shown in this manual may differ slightly from the actual
items on your camcorder.
24_ English
All manuals and user guides at all-guides.com
) or Player (
)
up or down to select "System", then press the
)
up or down to select "Clock Set", then press the
)
up or down to set the current year, then press the
).
MODE
CARD TAPE
(VP-D395i only)
BATT .
Camera Mode
System System
Clock Set
1 JAN 2008
Remote
00 : 00
Beep Sound
Shutter Sound
Language
Demonstration
Adjust Adjust Sele lect MENU Exit Exi
Camera Mode
System System
Clock Set
1 JAN
2008
Remote
00 : 00
Beep Sound
Shutter Sound
Complete !
Language
Demonstration
Move Move Sele lect MENU Exit Exi