Table of Contents
Advertisement
ENGLISH
Preparation
Using the Lithium Ion Battery Pack
Use SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.
The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch to [Off].
2. Attach the Battery Pack to the DVD
Camcorder.
3. Connect the AC Power adapter
(AA-E9 TYPE) to a wall socket.
4. Open the LCD Screen and Jack
Cover.
5. Connect the DC cable to the DC IN
jack on the DVD Camcorder.
The charging indicator will start to
blink, showing that the Battery is
charging.
6. When the Battery is fully charged,
disconnect the Battery Pack and the
AC Power Adapter from the DVD
Camcorder. Even with the power switched off,
the Battery Pack will still discharge.
Blinking time
Once per second
Less than 50%
Twice per second
50% ~ 75%
Three times per second
75% ~ 90%
Blinking stops and stays on
90% ~ 100%
On for a second and off for a
Error - Reset the Battery Pack and the DC
second
Cable
All manuals and user guides at all-guides.com
Charging rate
<Charging indicator>
21
Advertisement
Table of Contents
