Receiving Broadcast Station - Kenwood HM-636 Instruction Manual

Receiving broadcast station

When the TUNER/band key is pressed, the unit will automatically be switched on and reception status will be reached.
One-by-one presetting (3)
Tuning to a non-
preset radio
™
station (1)
One-by-one preset-
™
ting (2,4)
20
EN
™
Tuning to a
non-preset
radio station
™
(2)
1. Select the tuner input.
Each press of the TUNER/band key switches the band as follows.
FM
AM
2. Preset a radio station in memory.
Collective presetting of stations
Follow the procedure in "Collective presetting of stations" to preset auto-
matically the tunable radio stations in your area.
÷ Once the stations are stored by auto presetting, you are not required to
repeat this procedure the next time you listen to radio. However when
you shift to another location whereby the broadcast station frequencies
are different, you will have to re-execute the presetting of stations.
One-by-one presetting (Manual preset) ™
A station can also be tuned even when it is not preset. For details, read
"Tuning to a non-preset radio station (Auto tuning, Manual tuning)".
3. Tuning (Preset Call)
÷ If radio stations have al-
ready been stored with
auto presetting or manu-
al presetting, select a sta-
tion using the 4, ¢
key. Each press of the
same key switches the
preset stations in se-
quence.
When ¢ is pressed : 1=2=3 ... 28=29=30=1...
When 4 is pressed : 30 = 29 = 28 ..... 3 = 2 = 1 = 30.....
÷ When a key is held depressed, preset stations will be skipped at an inter-
val of about 0.5 second.
÷ To select a preset station from the remote, use the 4 P.CALL ¢ key
or numeric keys.
Playback of TAPE
Collective presetting
of stations
¡
The "TUNED" indicator lights
when a station is received
Frequency display