Spectralink Voip Commands; Spectralink Voip Parameters (802.11B And Bg Modes Only - Avaya AP-3 User Manual

SpectraLink VoIP Commands

Name
State
Status
SpectraLink VoIP Commands

SpectraLink VoIP Parameters (802.11b and bg Modes Only)

These parameters enable or disable the SpectraLink Voice over IP
feature.
The Spectralink Legacy Support parameter should be enabled if the AP is
operating in 802.11bg mode and legacy 802.11 Spectralink telephones
are used. This parameter will set the basic rates of the AP to be 1 and 2
Mbps in 802.11bg mode and will allow old telephones that operate only at
the 1 and 2 Mbps basic rate to connect to the AP.
A-92
Type Values
Integer disable
blocking
listening
learning
forwarding
broken
Integer enable
disable
Access CLI Parameter
R state
RW status
Avaya Wireless AP-3 User's Guide
2 of 2