Set - Avaya AP-3 User Manual

CLI Commands

set

Configures the value of the specified parameter. To see a definition and
syntax example, type only set and then press the Enter key. To see a list
of available parameters, enter a space, then a question mark (?) after set
(example: set?).
As shown in the following examples, parameters may be set individually
or all parameters for a given table can be set with a single statement.
Syntax:
[Device-Name]> set <parameter> <value>
[Device-Name]> set <table> <index> <argument 1> <value 1> ...
<argument N> <value N>
Configuring Objects that Require Reboot
Certain objects supported by the Access Point require a device reboot for
the changes to take effect. To inform you of this behavior, the CLI
provides informational messages when you have configured an object
that requires a reboot. The following messages are displayed as a result
of the configuring such object or objects.
A-32 Avaya Wireless AP-3 User's Guide