Is The Drive Module Fault/Uid Led Blinking Amber - HP AA988A - Modular Smart Array Storage Controller SCSI User Manual

Is the drive module Fault/UID led blinking amber?

Answer
No, but the Online/Activity
LED is blinking
Yes, and the
Online/Activity LED is off
Yes, and the
Online/Activity LED is on
Yes, and the
Online/Activity LED is
blinking
58 HP StorageWorks 2012sa Modular Smart Array user guide • May 2008
Possible Reasons
The drive is
rebuilding.
The drive is offline.
A predictive failure
alert may have been
received for this
device.
The drive is online,
but there is no
activity. A
predictive failure
alert may have been
received for this
device.
The drive is active,
but a predictive
failure alert may
have been received
for this device.
Actions
No action required.
Note: Do not remove a drive
that is rebuilding. Removing a
drive may terminate the current
operation and cause data loss.
• Check the event log for
specific information regarding
the fault.
• Isolate the fault.
• Contact an authorized service
provider for assistance.
• Check the event log for
specific information regarding
the fault.
• Isolate the fault.
• Contact an authorized service
provider for assistance.
• Check the event log for
specific information regarding
the fault.
• Isolate the fault.
• Contact an authorized service
provider for assistance.