Safety Precautions - HP AA988A - Modular Smart Array Storage Controller SCSI User Manual

Safety Precautions

For your protection, observe the following safety precautions when setting up your
equipment:
Install the system in accordance with the local safety codes and regulations at the
■
facility site. Follow all cautions and instructions marked on the equipment.
Ensure that the voltage and frequency of your power source match the voltage
■
and frequency inscribed on the equipment's electrical rating label.
Never push objects of any kind through openings in the equipment. Dangerous
■
voltages may be present. Conductive foreign objects could produce a short circuit
that could cause fire, electric shock, or damage to your equipment.
Note –
vendor is not responsible for the safety or regulatory compliance of a modified
product.
Caution –
injury. An enclosure with all drives installed can weigh 65 pounds (29.5 kilograms).
Caution –
are properly grounded before touching a static-sensitive component or assembly.
26 HP StorageWorks 2012sa Modular Smart Array user guide • May 2008
Do not make mechanical or electrical modifications to the product. The
Two people are needed to lift and move the enclosure. Use care to avoid
Electrostatic discharge can damage sensitive components. Be sure you