Installing Enclosures Into A Rack; Preparing The Rack; Assembling And Installing The Rackmount Bracket Kit - HP AA988A - Modular Smart Array Storage Controller SCSI User Manual

Hp storageworks 2012sa modular smart array user guide (488320-002, july 2008)

Hide thumbs Also See for AA988A - Modular Smart Array Storage Controller SCSI:

Table of Contents

Installing Enclosures Into a Rack

This section describes how to install the enclosures into a standard 19-inch rack

cabinet with a 28 to 36-inch (71.12 to 91.44-cm) depth.

Tip –

bags until you are ready to use them.

Before installing enclosures in a rack cabinet, ensure the rack is installed according

to its installation instructions and that the installation complies with local safety

codes.

1. Stabilize the rack as described in its documentation.

2. If the rack has casters, make sure the casters are locked to prevent the rack from

rolling.

3. Remove or open the top front panel and the vented back panel.

Assembling and Installing the Rackmount Bracket

Kit

Note –

instructions, use them in place of the instructions in this guide.

HP StorageWorks 2012sa Modular Smart Array user guide • May 2008

To help you correctly identify the screws, keep all hardware items in plastic

If the rackmount bracket kit you are installing includes assembly

Table of Contents

Do you have a question about the AA988A - Modular Smart Array Storage Controller SCSI and is the answer not in the manual?

Storageworks 2012sa