Installing The Msa2000 Family Ses Driver For Microsoft Windows Hosts; Connecting The Enclosure To Data Hosts; Connecting Remote Management Hosts - HP AA988A - Modular Smart Array Storage Controller SCSI User Manual

Installing the MSA2000 Family SES Driver for
Microsoft Windows Hosts
Installing the MSA2000 Family SCSI Enclosure Services (SES) driver prevents
Microsoft Windows hosts from displaying the Found New Hardware Wizard when
the storage system is discovered.
1. Download MSA2000 Family SCSI Enclosure Services (SES) driver package
msa2000-ses-version.zip
SAN Arrays, select your product, and go to Related products.
2. Extract the package contents to a temporary folder on the host.
3. In that folder, double-click
4. Click Finish.
The driver is installed.
5. Optionally, delete the extracted files and the SES driver package.

Connecting the Enclosure to Data Hosts

Cable connections vary depending on configuration. For a complete list of
supported configurations, go to the MSA2000 product site at
http://www.hp.com/go/msa
guide. This document is updated whenever newly supported configurations are
added.

Connecting Remote Management Hosts

The management host directly manages systems out-of-band over an Ethernet
network. This section describes how to connect the Ethernet cables to the
management host.
1. Connect an Ethernet cable to the Ethernet management port on each controller.
2. Connect the other end of each Ethernet cable to a network that your management
host can access (preferably on the same subnet).
40 HP StorageWorks 2012sa Modular Smart Array user guide • May 2008
from the
http://www.hp.com/go/msa
to install the driver.
Setup.exe
for the latest MSA2000 Configuration Options
. Select MSA