3.1
Flow of Operations
This section describes the flow of operations starting with scanning of a document on ScanSnap!
scanner through to saving the scanned image in PDF format.
Operation
1. Make sure that the "ScanSnap! Monitor" icon is displayed on the task tray.
HINT
2. Load the document.
Refer to "3.2 Scanning Different Document Types" (page. 22) and "3.3 Loading Docu-
ments" (page. 24).
20
If the "ScanSnap! Monitor" icon is not displayed, select [Programs] - [Scan-
Snap! Driver] - [ScanSnap! Monitor], from the Start menu, and start up "Scan-
Snap!".