Ports And Led Indicators - Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual

Chapter 5 WAE Inline Network Adapter

Ports and LED Indicators

Figure 5-2 Inline Network Adapter Port Numbering and LEDs
W1
W1 Port WAN1; Group 1 WAN interface
W0 Port WAN0; Group 0 WAN interface
OL-15012-02
WAE from becoming a single point of failure and allows traffic to continue to flow
between the router and the client while it passes through an unresponsive WAE
without being processed.
For more information about configuring the inline network adapter, see the Cisco
Wide Area Application Services Configuration Guide.
Figure 5-2 shows the inline network adapter port numbers, interface designations,
and LEDs.
L1 W0
The inline network adapter has three LEDs that correspond to each port (the W1
LEDs correspond to Port W1, and so forth).
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
W1 L1 W0 L0
L0
L1
Port LAN1; Group 1 LAN interface
L0
Port LAN0: Group 0 LAN interface
Table 5-1
Ports and LED Indicators
LINK/ACT
100
BYPASS
1000
describes the LEDs.
5-3