Ports And Led Indicators - Cisco Wide Area Virtualization Engine 274 Hardware Installation Manual

Chapter 4 WAVE Inline Network Adapter

Ports and LED Indicators

Figure 4-1 2-Port Inline Network Adapter Port Numbering and LEDs
W0
Port WAN0; Group 0 WAN interface
Table 4-1 Inline Network Adapter LEDs
LEDs
Link / Activity
100
1000
Bypass
OL-17739-01
Figure 4-1 shows the 2-port inline network adapter port numbers, interface
designations, and LEDs.
The inline network adapter has three LEDs that correspond to each port (the W0
LEDs correspond to Port W0, and the W1 LEDs correspond to Port W1).
Table 4-1 describes the LEDs.
State Description
On The 10/100/1000BASE-T interface is receiving power.
Blinking The Ethernet link is transmitting data.
On The speed of the Ethernet connection is 100BASE-TX.
On The speed of the Ethernet connection is 1000BASE-TX.
Both the 100 and The corresponding ports are in mechanical bypass mode.
1000 LEDs are
on
Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
W0 L0
L0
Port LAN0: Group 0 LAN interface
Ports and LED Indicators
W0 L0
LINK/ACT
100
BYPASS
1000
4-3