Installing Hardware Options For The Wae-7371, Wae-7341, And Wae-674; Removing The Cover - Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual

Removing the Cover

Warning
OL-15012-02
Installing Hardware Options for the
WAE-7371, WAE-7341, and WAE-674
This chapter provides basic instructions for installing hardware options in your
Wide Area Application Engine (WAE). These instructions are intended for
technicians who are experienced with setting up Cisco WAE hardware.
This chapter contains the following sections:
• Removing the Cover, page 4-1
Working with Adapters, page 4-3
•
Completing the Installation, page 4-8
•
Installing Memory in a WAE-674, page 4-9
•
Replacing a Hard Disk Drive, page 4-13
•
Replacing a Power Supply, page 4-15
•
Before working on a system that has an on/off switch, turn OFF the power and
unplug the power cord. Statement 1
To remove the device top cover, follow these steps:
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
C H A P T E R
4
4-1