Setting The Passcode - Konica Minolta bizhub 25 Administrator's Manual

Setting the Passcode

Set the passcode required for closed transmission, closed reception, and passcode polling.
You can use closed transmission and reception without setting a passcode; however,
setting a passcode is recommended to strengthen the security function.
Note
• When setting the passcode, enter a number other than "0000". If you enter "0000",
the passcode setting is disabled.
• Make sure that you do not forget the passcode.
• For details on the communication range using closed communication and passcodes,
refer to "Communication and Range of
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Security Communication].
5
Press [Passcode].
2-14 Closed Communication
Passcodes". (See page 2-15.)