Konica Minolta bizhub 25 Administrator's Manual page 99

Item
IPv6 Setting
Note
• You can also specify TCP/IP settings using
Chapter 3, "Setting the Connection Environment" in the Message Board Guide.
• Make sure to obtain permission from the network administrator before changing
the IP address. Improperly changing the IP address may cause the network to stop
functioning normally.
„ Opening the TCP/IP Settings Screen
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Network Settings].
5
Press [TCP/IP Settings].
2-46 Specifying the Network Settings
You can set the following settings:
Obtain IPv6 address
l
Link Local Address
l
Global IP Address
l
Subnet Prefix Length
l
Default Gateway
l
For details on the IPv6 settings, refer to Chapter 3, "Setting the
Connection Environment" in the Message Board Guide.
Message Board. For details, refer to
Description