Setting Security Codes; Setting The Administrator Password - Konica Minolta bizhub 25 Administrator's Manual

Setting Security Codes

You can set an administrator password to prevent users other than the administrator
from editing the settings in the [Management] screen, and enable the administrator to
centrally manage machines. A protect passcode is a four digit number required when
setting function protect settings and printing security reception documents.

Setting the Administrator Password

Up to 28 characters can be entered for an administrator password. Make sure to make a
note of and store the password after setting it.
IMPORTANT
If you forget the administrator password, it is necessary to initialize the machine and
set the password again.
In such a case, contact your local technical representative.
„ Setting the Administrator Password
1
Press <Setting>.
2
Press [Management].
2-4

Setting Security Codes