Setting The Automatic Logout Time - Konica Minolta bizhub 25 Administrator's Manual

Setting the Automatic Logout Time

You can set the time it takes before the machine automatically logs out a logged in user if
no operations have been performed on the machine.
Note
• You can also set the automatic logout time using
to Chapter 3, "Specifying Device Settings" in the Message Board Guide.
• For details on manually logging out, refer to "
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Network Settings].
5
Press [Automatic LogoutTime].
Message Board. For details, refer
Logging Out". (See page 1-46.)
Specifying the Network Settings
1
2
2-75