Konica Minolta bizhub 25 Administrator's Manual page 104

„ Setting DHCP
You can use a DHCP (Dynamic Host Configuration Protocol) server to automatically
obtain the IP address and subnet mask, etc.
A gateway address and DNS server address will also be assigned if they are set on the
DHCP server.
Note
• If the power is left OFF for an extended period, the IP address may be disabled.
• The IP address and subnet mask assigned by the DHCP server cannot be changed.
• If you do not want to use a DHCP server, disable the DHCP settings, and manually
assigned the IP address and subnet mask. For details, refer to
Address" (see page 2-52)
1
Open the TCP/IP settings screen.
2
Press [ Obtain IP address].
3
Select [ON] to obtain the IP address automatically or [OFF] to not, and press
[Enter].
and "Setting the Subnet
(See page 2-46.)
Specifying the Network Settings
"Setting the IP
Mask" (see page 2-53).
1
2
2-51