Date/Time Setting - Konica Minolta Bizhub C650 Installation Manual

19. Place the test pattern face down on the original
glass.
20. Place about ten sheets of A3
paper on the test pattern placed on the original
glass.
Lower the cover.
21. Press the start key.
The machine will start reading the test pattern.
22. When the machine completes reading the test
pattern, the "Gradation Adjust" screen will reap-
pear.
23. Repeat steps from 18 through 21 to let the
machine read the test pattern two times.
24. Touch "END."
XIII. Date/Time setting
1. Make sure that the Service Mode screen is dis-
played.
2. Display the Date & Time Setting screen.
(To display the Date & Time Setting screen, press
Stop → 1 → 1 → 4 → 4 → Clear on the control panel.)
3. Press the clear key.
4. Enter the data for the year, month, day, and time-
of-day from the 10-key pad.
5. Touch "Entry."
Note:
Touching the Entry key returns the figures in the
Date & Time Setting screen to 0 and Date & Time
Setting has been completed.
A00JIXC025DA
or Ledger
6. Touch "END."
7. Touch "Exit" on the Service Mode screen.
8. Select the Date/Time Setting function as follows:
A00JIXC024DA
Utility/Counter → Administrator Settings → Enter
the Administrator Password (Default setting:
12345678) → System Settings → Date/Time Set-
tings.
9. Select the item you want to set and press the
clear key.
10. Enter the data for the year, month, day, and
time-of-day from the 10-key pad.
11. Touch "OK."
12. Touch "Close" three times.
E-12
A00JIXE188DA
A00JIXE189DA