Pin-Association Workflow; Setting Of The Auto-Logout-Time - Konica Minolta bizhub 28e Manual

3. If the information entered matches a valid domain username and password, the card
number will now be permanently associated with this user.
4. After registering the IC Card, the "Login" screen will be displayed.

5.2.2 PIN-Association Workflow

The user will be notified that they need to register a PIN number with their card.
The process works as follows:
1. The user swipes their card at the device.
2. The device will prompt the user to register a PIN number.
3. Once the PIN number has been entered it will be associated with the card.
After registering the PIN number, the "Print Jobs" screen will be displayed.

5.3 Setting of the auto-logout-time

If the user does not operate the MFP for (180) seconds, the user will be automatically
logged out.
The user can change the automatic logout time by following the procedure in the
PaperCut administration interface.

Devices -> [select device] -> Advanced Config Editor
Search for "ext-device.Konica Minolta.copier-timeout-secs"

 Enter a value and click Update
Copyright © 2019 KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC. All Rights Reserved
22 of 27
06/2019