Cleaning The Print Head Deeply - Canon 3300B002 On-Screen Manual

Cleaning the Print Head Deeply

> Routine Maintenance
Contents
Deeply
Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply.
Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so
clean the Print Head deeply only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
Operation Panel .
See
2.
Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in
the Rear Tray.
3.
Open the Paper Output Tray gently.
4.
Clean the Print Head deeply.
Press the Menu button.
(1)
Use the (Left) or
(2)
button.
The Settings screen will appear.
Use the (Left) or
(3)
button.
OK
The Maintenance screen will appear.
Use the (Up) or
(4)
button.
The confirmation screen will appear.
Use the (Up) or
(5)
The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This
takes about 1 minutes 30 seconds.
The print pattern confirmation screen will appear.
Use the (Up) or
(6)
The nozzle check pattern will be printed.
5.
Examine the nozzle check pattern.
>
When Printing Becomes Faint or Colors Are Incorrect
(Right) button to select Settings
(Right) button to select Maintenance
(Down) button to select Deep cleaning, and press the OK
(Down) button to select Yes, and press the
(Down) button to select Yes, and press the
Advanced Guide Troubleshooting
> Cleaning the Print Head
, and press the OK
, and press the
button.
OK
button.
OK
Page 116 of 853 pages