Canon 3300B002 On-Screen Manual page 509

Scanner Button Settings Tab (Open with Application)
>
Advanced Guide Scanning
Button Settings Tab (Open with Application)
Scanner Button Settings Tab (Open with Application)
On the Scanner Button Settings tab, you can specify the following settings.
This section describes the settings available when Select Event is Open with application.
You can specify how to respond when scanning using the Operation Panel of the machine with the scan
mode set to Open with application.
Event
Select Event
Displays the scan modes that can be selected on the Operation Panel of the machine. Select Open
with application.
Document Type
Select the type of document to be scanned.
Important
To scan correctly, select a document type that matches the document to be scanned.
Actions
Scan Settings
Document Size
Select the size of the document to be scanned.
When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
Important
When you select Auto Detect, the image may not be scanned at the correct position and size. In
that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the
document with the corner at the arrow of the Platen.
> Scanning with the Bundled Application Software > MP Navigator EX Screens
> Scanner
Page 509 of 853 pages