Sending Faxes - Canon 3300B002 On-Screen Manual

Sending Faxes

>
Contents Faxing > Sending Faxes
Sending Faxes
This section describes dialing and sending faxes directly with the Numeric buttons.
For details on other ways to send faxes, see
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Adjusting the Sending Quality
Note
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line
access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons
1.
Preparing for sending a fax.
Make sure that the power is turned on.
(1)
Operation Panel
See
Load a document on the Platen Glass or in the ADF.
(2)
Loading Originals.
See
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on the types and conditions of document which you can fax, see
Can Load .
Press the FAX button.
(3)
The fax standby screen will appear.
Adjust the image quality (fax resolution) or density (scan contrast) as necessary.
(4)
See Adjusting the Sending Quality
2.
Sending the fax.
When the document was loaded on the Platen Glass:
Use the Numeric buttons to dial the recipient's number.
(1)
Using Various Sending Functions
.
.
Advanced Guide Troubleshooting
.
Originals You
Page 62 of 853 pages